Home » Posts tagged 'Blossoming Happiness Dies'
Tag Archives: Blossoming Happiness Dies
Hues of Happiness Easel Card
Stampin’ Up!’s Hues of Happiness designer series paper (DSP) is beyond gorgeous. I made this bouquet easel card with one of the less used pieces of DSP that I thought was extra pretty with its yellow and black centers.
. I started my fussy cutting focusing on those three little flowers on the right that I wanted to hang over the pot. The fresh freesia flower you see on the left was a separate fussy cut that I added so that a flower wasn’t hanging over too far on the pot where I wanted a couple leaves (fussy cut). The card itself is a tri-layer fold that I saw Jan B. make at janbcards.com. She was casing a lovely card from a Japanese demonstrator and translating the directions from Japanese to English. What a challenge! Thank you, Jan. From there I changed up the dsp, the embossing folder and altered the cuts a bit to come up with this Hues of Happiness Easel Card.
.
The bottom flap folds out to give you a great place for a message!
Remember- don’t toss those edge pieces of your DSP! You can add them to the inside like in the picture above!
I started a bouquet card with cutting out the flowers in the Hues of Happiness DSP with the Blossoming Happiness Dies but it just lacked something and then I realized the piece of DSP I thought was much too busy was actually perfect. However, I did save the cutouts and used them on the back of the bouquet:
I think its the yellow in the DSP that made you prefer it over the other.
Maybe so, Sal, it definitely is eye appealing with yellow centers and little yellow flowers and added greenery which always enhances flowers. What a great job the Stampin’ Up! artists did in designing this paper!
Recipe
- Top Base 1: Bermuda Bay Cardstock, 4 1/4 X 11, scored at 5 1/2 and 2 3/4
- Bottom Base 2: Bermuda Bay Cardstock, 4 1/4 X 10 3/4, scored at 5 3/8;
- adhere to base 1 with the fold of base 2 aligned to the inside bottom edge of base 1. The length of base 2 is 1/4″ smaller to allow for the fold of base 1. The top of base 1 flips up and the bottom base 2 flips down. I didn’t get a picture but here is one from JanB’s blog post. I am using 1/8″ borders so my layers won’t look like hers
- Middle Layers for Base 2, (X2), Basic White, 4 X 5 1/8;
- one is for the inside of base 2, the other is for the outside of base 2 when it is folded in
- DSP for Card Base 2: Hues of Happiness DSP, 3 3/4 X 4 7/8, this is for the outside of base 2 when it is folded in
- Folded Layers of Base 1 (X2): Basic White, 4 X 2 1/2
- DSP Layer for the folded layers (X2): DSP, 3 3/4 X 2 1/4; make an effort to use the same color of DSP flowers on the right and left as you have on the Base 2 DSP that folds in so it has a continuous look
- Flower Pot Base: Basic White, 3 1/4 X 2 3/4
- pencil mark the top of the base 1/2″ in on the right and left sides
- pencil mark the bottom of the base 1″ in on the right and left sides
- cut from the bottom to the top mark on both sides
- Flower Pot Rim: Basic White, 3/4 X 4 1/4
- die cut both the base and rim with the Stitched Greenery Die
- Circle Stabilizer for flowers: Window Sheet, die cut with the 2nd largest of the plain layering circles
- Attach the window sheet circle between the base and rim of the pot making sure the top won’t go over the base of the card when closed. This also gives you a guide for mounting your flowers.
- Lay the pot on base 1, 1/8″ above the easel fold and pencil mark the pot on the base, then cut the base cardstock to match the pot. I tried to use the trimmer and found fussy cutting would have been better
- Adhere the pot to the base with a foam strip (you can see this in the picture of the back)
- The bottom of the pot should line up with the basic white layer (I had to trim mine a bit)
- Bouquet: Hues of Happiness Designer Series Paper cut to about 4″ X 3 1/2″ with added fussy cut greenery and flowers to make it fuller if necessary. I wanted those three little flowers on the bottom so I started there and used regular scotch tape to glue the extra pieces I wanted to fill it in with edge flowers and greenery
- Attach to the window sheet with glue dots
- cut additional flowers for the back with the Blossoming Happiness Dies or use the same sheet of DSP if you aren’t making numerous cards and have enough or don’t have the dies
- Sentiment Layer: Bermuda Bay Cardstock, 4 X 3/4, attach with a 1/2 X 3 3/4 foam strip 2 3/4″ from bottom
- Sentiment Top Greeting: Basic White, 3 3/4 X 1/2, stamp with greeting from Pansy Patch Stamp Set
- Bow: Scrap of Bermuda Bay cut with the Pierced Blooms Die (retired)
- Embellishment: In Color Rhinestone for center of the bow and a dragonfly punched from retired DSP
What!? You didn’t use the brass butterflies?
Not this time, Sal. I must be over-using them for you to say that!
This card and a triple time stamping card were for my July Stamp Camp.
And a lunch with something zucchini or green beans, right?
Hopefully all the zucchini will be shredded and frozen by then, and the green beans are already frozen. The cherry tomatoes are the best this year! So sweet, but I digress….
Well, it is not a ‘card buffet’ where you pick out which card to make from several kits, and it is not a ‘stamp-a-stack’ where you make several cards of each design, and it is not a ‘technique class’ which I have held before, and it is not a ‘club’ or ‘coffee and a card’, so I guess the closest title would be a ‘stamp camp’, just not an all day event. Does anyone have a better name I could use?
Click on little Sal in the computer to go to the online store.
SAL, Be Salt And Light out there folks, it’s a crazy world these days
Karen
Sending Smiles, Blossoming Happiness and New Horizons
Click a second time on the header to go to the blog.
The Tea Boutique Cards & Envelopes in the annual catalog use all five of the new In Colors with cards and matching envelopes. I challenged myself to make a card that matched the envelope!
.
I chose the smaller of the flowers in the Blessings of Home stamp set and the long stem flower and greenery from the Sending Smiles stamp set cut out with the Sending Dies which even have a die for that itty bitty flower. The envelope has a Starry Sky little flower on the flap so I replicated that look. The Flowers of Home Dies cut out the flower image and the die set has many other images to add greenery!
Recipe for Sending Smiles Tea Boutique Cards
- Base: Tea Boutique Card in Orchid Oasis, Measures 8 1/2 X 5 1/2 folded at 4 1/4
- Layer 1: Basic White, 3 3/4 X 5
- Layer 2: In Color Designer Series Paper in plaid, 3 5/8 X 4 7/8
- Top for die cut pieces: Basic White, 6 X 4 1/2
- stamp smaller flower in Blessings of Home stamp set with Orchid Oasis ink, color with Stampin’ Blends- Lt Fresh Freesia, Lt Granny Apple Green, Lt Call Me Clover and use a Blender pen & Orchid Oasis ink
- stamp in Fresh Freesia ink 2 long stem flowers from Sending Smiles stamp set (outside & inside flower) and use the blender pen and Orchid Oasis ink to add color on the flowers
- stamp one green leaf for outside in Granny Apple Green and one double green leaf for inside, die cut
- Cut ‘sending’ background from the Basic White
- Stamp ‘Love & Big Hugs’ in Orchid Oasis and cut with die in Sending Dies, cut off right edge even with the DSP layer and leave a little on the left edge for a gem when you line up the greeting die
- ‘Sending’ Top Layer: Use the In Color Designer Series Paper left over from layer 2, 1 5/8 X 3 5/8, and add backing of double back adhesive paper 1 1/2 X 3 1/2
- You should have enough of the In Color Designer Series Paper to make two 1 1/8 X 1 1/8 squares to cut diagonally for inside corners
- Greeting on inside of second picture: Basic White, 3 X 3 , Flowering Tulips stamp set, stamped in Starry Sky and cut with a retired Hippo & Friends Die
- Greeting Layer: Starry Sky, 3 X 3, die cut with retired Hippo & Friends Die, cut in half and glue to back of greeting
- Little Flowers (X2): Starry Sky, 1 X 1, die cut with Sending Dies and glue on a scrap of Daffodil Delight
- Embellishments: 5 In Color jewels, 4″ of Fresh Freesia ribbon tied in a knot
The top pieces are all adhered with Stampin’ Dimensionals, inside corners and flowers are glued directly down.
I remember you used the Parakeet Party and the Tranquil Tide Cards and Envelopes for the catalog launch and now you have used the Orchid Oasis. What are you going to do with the Starry Sky and Sweet Sorbet?
The Tea Boutique Cards & Envelopes have 20 bases with matching envelopes so I have some left of all the colors. (Click for Catalog Launch details). I would love to do more of what I have done here in all the colors!
Recipe for Blossoming Happiness Card
. 
.
The front of this card is from a kit sent to me when I played Bunco online with Debra Harrison at Simply Sweet In Ink Designs. I created the inside using matching Hues of Happiness DSP and Blossoming Happiness Dies.
Base: Thick Basic White, 4 1/4 X 11, scored at 5 1/2
Layer 1: Hues of Happiness DSP, 4 X 5 1/4
Top Layer: Basic White, 4 X 4, Die cut with large Blossoming Happiness Die; Stamp sentiment from Pansy Patch stamp set in Granny Apple Green in upper right of die cut piece
Flower & 2 sets of Leaves: Hues of Happiness DSP die cut with Blossoming Happiness Dies.
Inside Layer: Hues of Happiness DSP with center cut out using retired Ornate Layers Die and stamped in Melon Mambo using the Limited Edition stamp set.
Recipe for New Horizons Card
. 
.
Base: Misty Moonlight, 8 1/2 X 5 1/2, Scored at 4 1/4
Layer 1 (X2): Soft Succulent, 5 3/8 X 4 1/8
Top Layer: New Horizons DSP, 5 1/4 X 4, and 5 1/4 by 2; I wanted the lake in the middle so I cut 3/4″ off the top of the 6″ DSP, then cut the 6″ width into two pieces – 4″ wide with the remaining 2″ wide for inside
Use the Oceanfront stamp set for grass in Evening Evergreen and Boulders in Basic Gray. Note: Stamp the boulders first, mask them, and then stamp the grass
On the Horizon stamp set is used for the birds but stamp lightly or they become blobs -practice makes perfect!
Horizon Dies are used for the fence with a scrap of Basic White and the grass with a scrap of soft succulent.
Thank you for your order is the retired You Always Deliver stamp set.
Embellishments are the retired Pebbles Enamel Shapes.
I hope I have brought you a “pinch of creativity to spice up your crafting world!”
Have a wonderful day!
SAL, Sending A Lovely set of cards to inspire you
Karen (click on little Sal in the computer to go to my online store)
Happiness Abounds, Flowering Tulips, Sending Smiles
Hello Stamping Friends, (double click the header if you are using a mobile device)
June’s Party Event included three cards:
1) Happiness Abounds
. 2) Flowering Tulips
. 
. 3) Sending Smiles
. 
.
What a fun party! One lady said she was going to get a frame and make the card a wall hanging! There was lots of laughter as the stamping was going on!
My thank you gift to the hostess was a sweet bag made with the Butterfly Kisses designer series paper, casing Debra Harrison at www.simplysweetinkdesigns.com, by covering a white lunch bag with designer series paper. The guests received an Embossed Treat Bag of goodies with a Sweet Songbird flying through the air with clouds from Give It A Whirl dies.
. 
. 
The hostess received a card in her bag with a gift certificate to one of my events among other goodies. The greeting on the card is from Happy Hedgehogs. The ‘Hello Friend’ is the retired Friendly Hello. ‘So Happy You’re Here’ is from Sweet Songbirds.
. 
.
Those butterflies and birds just make me feel happy! So what is in the bags?
For the bags, I found a variety pack of M&Ms with hopes that they each would have a little of a flavor they liked and then I added a bag of flower seeds and a thank you card they could use; that way they went home with four cards from the event. For the thank you card I used the cards and matching envelopes from Sale A Bration. The door prize was a set of garden tools to help the winner plant her flower seeds.
The cardstock and matching envelope are so pretty that all I did is add the layering thank you from Amazing Thanks dies in the same colors of Pool Party and Soft Sea Foam, scored two lines at the bottom and then added some gems! I wish I would have taken a better picture.
Recipe for card #1) Happiness Abounds
- Base: Thick Whisper White, 5 1/2 X 8 1/2 scored at 4 1/4
- Layer 1(X2): Fresh Freesia, 5 1/4 X 4
- Layer 2 (X2): Basic White, 3 3/4 X 5
- Outside layer is die cut with Blossoming Happiness Die with the top point of die 1/4″ from top
- Stamp ‘happy birthday’ from Happiness Abounds Stamp Set in Gorgeous Grape Ink 3/4″ from bottom
- Wrap 6″ of Fresh Freesia 3/8″ Open Weave Ribbon around the bottom, add bow- 8″ of ribbon needed
- Inside uses a fussy cut flower from the side of Hues of Happinesss designer series paper, (don’t toss out those sides of your pretty paper); stamp greeting from Happiness Abounds Stamp Set in Gorgeous Grape ink
- Die cut three flowers, three double leaves and one many leaved stem from the Hues of Happinesss designer series paper with Blossoming Happiness Dies, attach flowers with Stampin’ Dimensionals and leaves with Glue Dots.
- Add bling
Recipe for card #2) Flowering Tulips (thank you Lindastamps.com)
- Base: Pool Party, 4 1/4 X 11, scored at 5 1/2
- Layer 1: Basic Black, 4 X 5 1/4
- Top Pieces:
- Flowering Fields DSP (retired) Tulips – 3 X 4 for middle
- Flowering Fields DSP (retired) Dots- 1 X 4 (X2) for top and bottom
- Mount the top and bottom first, flush to the black layer then mount the middle
- Banner: Vellum, 5 1/4 X 1 9/16 (1/16 beyond 1/2), punch with banner punch
- Tip: Build your banner with your tulip, stem and greeting then adhere to card front, I have vellum glue that doesn’t show but you can glue behind your tulip and greeting with just a touch under butterfly
- Tulip:
- Poppy Parade for main piece, 3 1/4 X 1 1/2 die cut with Tulips Dies
- Petal Pink for inside piece of tulip, 1 X 1 1/4 die cut with Tulips Dies; I used the top three dies shown in this picture with the first two pieces both done in Poppy Parade and sponged slightly with white ink and the third piece done in Petal Pink
- Greenery is Garden Green with the longer stem and leaf shown to the right in the picture and sponged with Garden Green to look like the DSP (designer series paper)
- Inside Layer 1:
- Poppy Parade, 4 X 5 1/4
- Basic White, 3 3/4 X 5
- DSP at bottom, 3 3/4 X 1
- Basic Black Strip, 3 3/4 X 1/8
- Greeting: Basic White, 2 X 2, stamp with greeting from Flowering Tulips Stamp Set and die cut with the scalloped Layering Circle Die, second to smallest that is 1 1/2 ” in diameter
- Brass Butterfly for bling
Recipe for card #3) Sending Smiles
- Base: Polished Pink, 8 1/2 X 5 1/2, scored at 4 1/4
- Layer 1 (X2): Basic White, 5 1/4 X 4
- Greeting:
- Basic White, 4 X 1, Stamp with Sending Smiles greeting in Polished Pink and die cut with Sending Dies greeting strip
- Sending:
- Background for ‘sending’ is Polished Pink, 1 5/8 X 3 5/8, Die cut with solid ‘sending’ in Sending Dies
- Top of ‘sending’ is Basic White, 1 5/8 X 3 5/8, layered on a piece of Adhesive Sheet 1 1/2 X 3 1/2, then die cut with the detailed ‘sending’ in the Sending Dies
- Brass Butterflies and In Color Jewels (retired)
- Inks:
- Polished Pink for flowers
- Pale Papaya for center of flowers
- Garden Green for stems of the flowers
- Granny Apple Green full strength and then second generation (no reinking just stamp) for grass
- Tips:
- Cut out your sending greeting and position it (without adhering) so you see where to stamp the flowers and stems. Be sure and move it out of the way before stamping
- Position the two flowers on the left on the same block by stamping the green stem made for the two flowers on a piece of scratch paper/ grid paper – and then positioning the flowers on the block so they will fit on the stem. If you stamp the stem first you may go off the paper with your flowers. The best option is to use a stamparatus with one plate for flowers and one plate for stems.
- Mask the flowers by stamping them on our Masking Paper and then fussy cutting them out. Place them on the flowers and then stamp the stem.
Hostess Bag
- White Lunch Bag base: Cut the bag off so it is 6″ tall
- Front: Butterfly Kisses designer series paper, 6″ X width of bag, adhere to front of bag
- Flap: Butterfly Kisses DSP (designer series paper), 3 X width of bag; score at 1″ on the short side and round the opposite corners. Adhere 1″ score section to back of lunch bag
- Label: Basic White, die cut with the Designer Tags Die, stamp sentiment in Starry Sky
- Label Strip: Fresh Freesia, 11/16″ (1/16 less than 3/4) X width of bag
- Fold over the top flap and adhere the label about half way down from flap
- Fussy cut and adhere 3 butterflies from the DSP and add Fun Flowers Resin Shapes, a clip and a bow in the clip made from Orchid Oasis 1/8″ Mettalic Woven Ribbon
Thank you for sharing part of your day with me.
SAL, Sharing A Lot
Karen
Case The Creator Card – Collar Card May ’22
Hello Stamping Friends,
It’s time to look at May’s Case The Creator (CTC) card with instructions and a video from Chris Slogar of buckeyeinklings.com. There is also a printable pdf file if you like to have a hard copy of the recipes. 
Case The Creator #4 printable pdf file
My card uses the Designer Series Paper (DSP) Hues of Happiness. The yellow on the collar is actually the same paper as the blue on the second layer, so cutting one strip of the 12″ DSP at 4 1/4″ gave me enough to have two lengths of 5 1/2″ and it was one of those ‘serendipity moments’ when I looked at the blue part of the DSP and decided it would be a nice layer. (That layer is not included in the CTC instructions.) Plus, the leftover 1″ X 4 1/4″ was perfect to use on the inside. Nothing wasted on that 4 1/4″ strip!
To decorate I stamped the largest flower from the Happiness Abounds stamp set in Daffodil Delight ink as a second generation (stamp off once) and then stamped over the flower with a greeting from Celebrating You in Night of Navy Ink. I used a Lt Crushed Curry Stampin’ Blend to color the edges of the flower petals that weren’t covered by the greeting. I cut out the flower with the Blossoming Happiness Die and then used the Dk Night of Navy Stampin’ Blend to color the edge of the flower. I made a bow and a left edge embellishment strip using the Misty Moonlight 1/8″ ribbon from the Cotton Ribbon Combo Pack in the mini catalog after coloring the ribbon with the Dk Night of Navy Stampin’ Blend. The leaves are cut from the Blossoming Happiness Dies on a scrap of Granny Apple Green. The inside greetings are from the Limited Edition stamp set.
Wow! Sometimes you just need beautiful DSP to do half the work!
So true, Sal.
Let’s look at the cards prepared by the other creative stampers.
Jo Brooks’ card is beautiful with the contrasting colors she chose, and she added another DSP layer in the inside with an oval for the greeting! What a great way to pull everything together inside and out!
. 
Sharon Fincham made 4 CTC cards using different DSP’s or different greetings and even a different orientation!
. 
Ann Hausmann decorated the card by putting a greeting in the collar fold!
Lucille Kearin cut off the edges of the collar to make a unique CTC card:
Joy Meadows embossed the layer under the collar in her card!
Thank you all for participating! What fun to start with a simple set of instructions and then to see what each stamper uses to create a special and unique card.
Yes, I added a Case The Creator category or they can click on the Recipe Box tab and find the card I made and then by clicking on the thumbnail of the card image you will automatically be at the blog post for that card.
Thank you for spending some of your day with me as I bring you a “pinch of creativity to spice up your crafting world!”
SAL, Sharing A Love
Karen
Welcome to my blog!
Sal Window to Products
