Home » Mother’s Day
Category Archives: Mother’s Day
Sharon Fincham’s May 2024 Shoebox Event
With Mother’s Day and Father’s Day right around the corner, Sharon designed cards that we could use for both. For Father’s Day she used a Stampin’ Up! set of dies- ‘Trusty Tools’ that cut out tools! She had pieces for a toolbox so we could slide the tools in the box and then glue it to the shiny silver embossed background! Our part was easy in putting everything in place. Her part would have been hard with making the little tools! Thank you, Sharon!
I saved two of the tools Sharon had in our kits for the inside and used ‘Guy Greetings’ for a fun saying. The paint brush swirl and the ‘you are extraordinary’ are in the ‘Beautiful Blizzard’ stamp set from years ago.
Another stamp from the Bake Sale list! You should just delete that tab.
You’re probably right. Or maybe I should make a card with each of the products and offer the product with a card for sale to see if that would market the stamp set.
For the second card, Sharon designed a fun gate fold with a piggly wiggly!!
I colored him too dark at Sharon’s house so when I got home I tried to lighten him with the blender pen but the ink ran outside the lines on the left, so then I had to find more flowers like Sharon had for the crown to hide my goof. We have our ways of fixing mistakes!
I will send it to my daughter with the movie “Charlotte’s Web”.
The heart is from the ‘Pictogram Punches’ stamp set. I loved how it had a heart in the heart which went so well with the greeting which is from the ‘Places In The Heart’ stamp set.
Sharon had a third card for us – peak performer that she is….. with products from Stampin’ Up! The designer series paper is ‘Meandering Meadows’ and the die is ‘Garden Meadows’ die.
The Happy Mother’s Day and little rose bud are in the ‘Tea Together’ stamp set.
They are Swarovski crystals I purchased at the Scrapbook Expo years ago. I save them for very special cards like this one. This year’s expo in Denver is Friday May 17-18th.
Thanks for stopping by!
SAL, Smile A Little – summer is coming!
Karen
Riddle of the day:
Question: I can only live where there is light but I die if the light shines on me. What am I?
Answer: A Shadow!
Lisa Christensen April 2024 Shoebox Event
It is always a delight to meet with friends to create beautiful cards. This month Lisa Christensen was our hostess and her cards were lovely. This first one uses the Stampin’ Up! ‘Berry Blessings’ stamp set and the Stampin’ Up! ‘Sweet Strawberry’ stamp set and punch.
. Oooh….can we look at it berry close?
Why sure, Sal!
My flowers were supposed to come off of the branch but the branch reminded me of all the little runners the strawberry plant puts out so I did it a bit different.
This set was available on Ebay if you missed it before it was retired by Stampin’ Up!:
The last cards I made, I didn’t stamp a greeting on the inside so I could write a short letter. I enjoyed having more room for more words.
I do, Sal, and hopefully others like to read them!
Lisa’s second card was an interesting and beautiful Z fold easel card! We could stamp with Happy Birthday or Happy Mother’s Day or….
Lisa used a die from the ‘Hand Penned Petal’ set for the flower and a die from the ‘Delicate Lace Edgelits Dies’ for the bottom. The greeting is a Close To My Heart greeting.
It’s like an upside down easel card.
True, we usually have the stop at the bottom but how wonderfully unique is this?!
Fancy front and room to write on the back (with a cute little fox in the DSP).
Is that one of those double bows you make wrapping it around your fingers?
It is, Sal. Following is a link to the Facebook Live where I showed crafters how to make the bow. I like that both tails come out from the back. Drag the minute line at the bottom to 28:20 to see the instructions.
I assume you have all those sets from your 15 years as a Stampin’ Up! demonstrator?!
No, Sal, and that is what makes shoebox events so fun. Everyone has different tastes and different sets for crafting.
Colorado’s Scrapbook Expo is happening next month, May 17 & 18th. Registration begins April 16 at 9:00 a.m.
![](https://i0.wp.com/stampalosopher.com/wp-content/uploads/2024/04/preregister.jpeg?resize=600%2C700&ssl=1)
Have a wonderful day!
SAL, See you At Lunch at the Expo on Friday
Karen
Riddle for the day:
Question: The more you take, the more you leave behind. What am I?
Answer: Footsteps!
Mother’s Day Cards
For Mother’s Day Cards this year, I wanted to use the Bouquet of Love Hybrid Embossing Folder/Die Combo. It was in the Stampin’ Up! Jan-Jun 2022 Mini catalog (pg. 11) It has an embossing folder and large heart die that you run through the Cut and Emboss machine at the same time to create amazing cards. Note: The catalog I am referencing is in the catalog tab and you can see the products there.
For this card I used the Pearlescent Specialty Paper on a Very Vanilla Base:
The heart that was cut out of the front of the embossed layer, I used for the back! It was too pretty to go into a stash.
No snarkiness, Sal!
The Happy Mother’s Day greeting is dry embossed with gold embossing powder. The greeting is from the Time For Tea retired set.
The paper, cut out with the same heart die, is from the retired Hues of Happiness paper. Don’t say it, Sal, but yes this is the sheet I looked at in the set of DSP and said I would never use. It won’t last much longer. I used it with the Love Cats card I made and the Letter Openers I made for party favors. Click on the blue to see those posts.
I have one daughter who loves blue and one who loves pink and grey so I made their Mother’s Day cards accordingly.
I guess you could call all these cards peek a boo cards since the heart is cut out of the front. These second cards use a special technique of inking the embossing folder itself before running it through the Cut and Emboss machine with the top layer of card stock. I started with a full 5 1/2 X 4 1/4 layer of card stock that matched the base. This gave me wiggle room in case I didn’t exactly center the heart but -serendipity! when I cut off 1/4 inch on the long side I had a beautiful piece to go on the inside. I purposely offset the heart the second time I cut the heart so as to have a piece for the inside.
I cut the heart out of the top layer, then drew around it with a pencil on the main card stock base so I could cut out the heart a second time from the base for the peek a boo look.
The ‘love and laughter forever after’ is from the Forever Fern set.
Card ideas for next year, right?
Oh Sal, we are creators; we can take an idea from a belated Mother’s Day and have the perfect anniversary card or birthday card or a card just to say ‘thinking of you’. The ideas are timeless! We don’t even need the same tools. We can take a heart die, an embossing folder and voila! we have a similar card.
I am blessed to be a mother and have my mother and mother in law still alive! Happy Mother’s Day to all of you dear followers, whether you are a mother to fur babies, little tykes or grown up children with children of their own!
SAL, Sending A Lot of Love
Karen
Copyright
Unless otherwise indicated, all stamped images are 2009-2023 Stampin’ Up! The projects shown are to spice up your personal creativity and may not be copied for publication or contest submission. The content of this website is my sole responsibility and the use of and content of classes, services or products offered are not endorsed by Stampin’ Up!
Triangle Corner Pop Up Card for Case The Creator (CTC) #3
Hello Stamping Friends,
Case The Creator Card Challenge
This month we cased Dawn Griffith’s Triangle Corner Pop Up Easel Card!
Yes, Dawn calls it a “Fancy, Schmancy Corner Fun Fold”! Her video is in the instructions.
Case The Creator #3 printable pdf file
I ordered the tiny magnets from Amazon:
The bicycle is hidden when you open up the easel so be careful with your design. I had a lot of fun with the bicycle! I used the long, tiny tulip die to create a basket of tulips! I will write my greeting under the ‘thank you’ since I went against protocol and made the bottom left another flower display instead of the place to write a note.
Heather made a fabulous graduation card with beautiful gold embossed paper and black! I love the diploma for the easel stand up!
Joy’s beautiful card uses the ‘Expressions In Ink’ designer series paper. We only have until May 2nd to get discontinuing items, like this DSP, from the annual catalog!
Sharon’s uses the Tea Time stamp set and Tea Together dies- look at the little heart she put on the lid!
Sheri used the ‘Flowering Fields’ DSP and the ‘Simply Succulents’ stamp set for greetings:
. .
Ann used the ‘You’re A Peach’ DSP and the ’Sweet As A Peach Bundle’. Those peaches even look fuzzy! The amazing “Dist ink tive” stamps! These are in the Annual catalog as well so order before May 2.
Jo’s little rabbit made us all smile, and eggs from the Arrange A Wreath set and Wreath Builder Dies were perfect with the paper.
.
.
They followed instructions and had a large place for a message.
Indeed! Isn’t it fun to see all the different creations from one set of instructions?!
SAL, Seeing April Leave
Karen
Click on little Sal in the computer to shop.
Mother’s Day Double Point Card
Happy Mother’s Day Stamping Friends,
Since we are still on the “Safer At Home” regulations, Mother’s Day is not the norm with visiting our mothers and delivering flowers so I made a special card with lots of flowers- vellum flowers on the outside, a potted plant underneath the double-point on the outside and a bouquet of flowers on the inside.
I was hesitant with the vellum flowers and vellum leaves since they don’t show much detail but they are so soft and pretty that I was pleased.
The Petal Pink Organdy Ribbon has that same soft look of the vellum flowers.
They do go well together, Sal, and with Petal Pink cardstock for the base it is a very feminine card, perfect for Mother’s Day!
I saw this card fold at http://thepamperedstamper.com.
I changed the flowers and the greeting and the paper and added ribbon but started with her double point card with vellum flowers.
So after all those changes is it still a case (copy and share everything)?
How about CASE -as in copy and selectively edit?!
I have found designing cards is a process of looking at lots and lots of ideas and then incorporating what I like – or changing things up based on what supplies I have in stock. The design changes constantly as I work and sometimes my trash can is full of the trial and errors of a design.
This is really quite a simple card to make. The points are two pieces of Designer Series Paper, Perennial Essence, that measure 3″ X 4″, scored at 1″ along the long side and then the corners are folded down to just above the score line. The 1″ section is adhered under the main layer-Whisper White in my case.
I put a little pencil mark in the middle of the long edge- 2″, and scored to the 1″ score line to make folding a little easier. I also cut a little off of each edge so nothing would hang out if my cuts weren’t quite perfect.
Hmmmm…….. sounds like that probably happened to you, right?
Guilty as charged! Check out these two sets of flowers for the inside. Do you notice the difference?
Yes, but notice the Petal Pink shading around the image in the first one. I saw that technique on a video tutorial by Tina Wardell and I think it really makes a difference. Tina showed how she colors around her images with a light colored Stampin’ Blend and then she takes the Stampin’ Blend color lifter and softens the edge of the coloring.
That is a retired set called ‘Just Because’. It is also what I used for the ‘Thinking of You’ greeting on the front. I set up the Stamparatus and masked off the flower pot above the words to get just the words that I wanted.
This set will go in the Bake Sale sets since I have used it for this Mother’s Day. Be sure and visit the Bake Sale tab once in a while. I will be adding more items after I compare what I have with what I see in the new catalog that I “must” have. Space is becoming an issue here at the house. I like this quote from ‘A Girl And A Glue Gun’:
Recipe
- Base: Petal Pink 4 1/4 X 11 Scored at 5 1/2
- Points: Designer Series Paper, Perennial Essence, 3 X 4 scored at 1″ along the long side. Make a small pencil mark at the 2″ middle of the wide section and score from the middle mark to the 1″ score line. Clip a little off the edges – see picture above. Adhere the 1″ under the Whisper White layer.
- Whisper White Layer: 4 X 5 1/4, make 2
- Stitched Nested Labels: Petal Pink 2 3/4 X 4 3/4, Die cut with the 2 1/8 X 4 (measured at the inside of the stitching on the die)
- Top Stitched Nested Labels: Whisper White 2 3/4 X 4 1/2, Die cut with the 1 3/4 X 3 1/2 (measured at the inside of the stitching)
- Flowers & Leaves: Perennial Essence Vellum Cardstock in green, yellow and pink- retiring in June . I used Flower Shop (retired) and its matching punch for the Petal Pink large flower and then punched three little yellow vellum flowers with a small flower punch just like the one we had for Sale A Bration. The green vellum leaves were punched from various retired punches. Current products would be the Perennial Flower Punch layering two punched pieces to make a six petal flower. The Leaf Punch and the Sprig Punch would work beautifully with the green vellum to make the greenery.
- Stamp Set for the inside bouquet is ‘Accented Blooms’ – retiring in June
- Stamp Set ‘Just Because’ with the greeting Thinking of You and the potted plant with Happy Mother’s Day
- Ink: Memento -Tuxedo Black, Petal Pink stamped on the large flower, Crushed Curry on the small flowers, Pear Pizzaz on the leaves
- Stampin’ Blends – Various with Light Petal Pink used to outline the bouquet image
- Embellishments – Petal Pink Organdy Striped Ribbon 11″ ; one Perennial Essence Floral Center; three sequins
Did I miss anything, Sal?
They might like to see how you made the same design a birthday card.
Of course! For the birthday card I used the ‘Beautiful Moments’ stamp set for the greeting on the inside:
The little vine under the greeting above is in the Accented Blooms stamp set and in the next image is a cute little curly stamp with a heart in the middle from Accented Blooms which I stamped under the potted plant and glued a heart shaped sequin over the stamped heart:
“What you focus on determines what you miss! ” I often focus so much on the greetings and large images that I miss these cute little stamps.
This stamp set is retiring so get it before it is gone (or selling on Ebay for three times the price)! We used the coordinating Tailored Tag punch at Christmas for the quilted plaid card so the two make a nice set to add to your collection.
Let’s take a walk down memory lane.
I love setting out the past cards we have made in clubs and I have several I set out for Mother’s Day. Some of you were with me when we made these and it makes me smile to remember the fun we had!
A Tea Together Bendy Card, this set is retiring in June:
A pop up box card:
A Magic Shutter Card:
A Rose Box:
Birthday Blooms Pull Up Card:
Layering Framelits (this is Whisper White in real life):
Using the cut out from the front:
This card is a monochromatic Very Vanilla:
The Tulip Embossing Folder was one of our very favorites for stunning cards:
A spinner card:
An Easel Card:
Remember the Top Note Die and lining up Designer Series Paper on the grid sheet and then cutting with the Top Note?
I posted all these mostly for my benefit to “scrapbook” our creations but it also shows the types of cards that we make during club and just might entice you to join when we start up clubs again in June. Contact me if you are interested.
Thank you for spending time with me today! Paul is on a special schedule due to the virus so he had to work and I played on the computer.
Happy Mother’s Day whether remembering and honoring your mothers or celebrating your own motherhood, I hope your day was blessed.
SAL, Sharing A Love
Karen
Current Hostess code is TQ3JBKP3 , click to visit the store. Don’t forget to check out the retiring list.
Vibrant Vases Tri-fold card
Good morning, Stamping Friends,
It probably won’t be morning by the time you get this post in your mailbox but currently it is still morning in Karen’s World!
Don’t you mean Stampalosopher? Karen’s World was your accounting firm.
Yes, indeed, it is a Stampalosopher World! Today I have one of two cards to show you that I created for a stint as a guest presenter in Grand Junction. The first was inspired by Joy Meadows and the very lovely card she sent for my birthday. Thank you, Joy!
Do you see how the front right hand flap is exactly the same size as the left side white layer with the same size black border? So cool! The white flaps inside and out are 3″ X 3 1/2″ with a black border of 3 1/8″ X 3 5/8″. The paper is from the SAB (Sale A Bration) Botanical Butterfly DSP (Designer Series Paper). One side had butterflies and the other had black and white designs like the dots Joy used here. I hope you stocked up on this paper during SAB! Her base is 9 7/8″ X 5 1/2″ scored at 4 1/8″ and 8 3/8″ . This leaves a right hand flap of 1 1/2″. The butterfly is from the Butterfly Gala stamp set which is still current and has a punch to match. See page 46 of the Annual Catalog.
But Karen, you can’t use retired Designer Series Paper!
I know, Sal, so I chose to use the Vibrant Vases and the Pressed Petals DSP with an accent color of Blueberry Bushel, one of the 2018-2020 In Colors that I will definitely need to stock up on before it retires next June.
Don’t you love the Pressed Petals DSP with the Blueberry Bushel? There is even a sheet of the DSP with plain burlap that I used for the right side little panel to coordinate with the background of the pressed petals.
And the Pressed Petals is part of the current “Buy 3 packs of DSP and Get One Free”!
That’s right, Sal, thanks for the input!
I used the Flourishing Phrases stamp set for the sentiments on the flap and the left side of the card and left the inside blank for a birthday, congratulations or just thinking of you sentiment. I needed a little larger flap than what Joy used for the butterflies so the measurements won’t be the same. The goal was to have the outside vases a bit plain with the inside vase truly “vibrant” to match the sentiments. The Vibrant Vases stamp set is a two-step stamp set with outline stamps for the vases and then a stamp-to-color for each vase and it even has a punch to match! Check out page 61 of the Annual Catalog. The yellowed images show what images are punchable. (Is that a word?)
I stamped the outside vases with the border stamps in Soft Suede and then stamped again with the stamp-to-color stamps after stamping off to lighten the image. I used the “H” acrylic block and spaced out the three vases and stamped with the outline stamps on a 6 X 3 piece of Whisper White. I then placed the (clean) stamp-to-color stamps on top of the images and took another “H” acrylic block and pressed it down on the stamps to attach them to the blocks in the perfect position. The stamparatus would have worked better but it was in use for the other card.
You could order a second one. I could help, page 184, #146276.
Thanks Sal. That might be a good idea for the next time. To make the inside vase truly “vibrant”, I stamped it in Blueberry Bushel, colored in the diamonds with Cajun Craze and Daffodil Delight regular markers and then took my Versa Mark ink and inked the entire image. I applied “Clear Embossing Powder” and then heated it to make the vase look like glass.
Stamp the greenery and flowers directly on the Very Vanilla card stock pieces – the flap for the outside and the Pretty Label punched piece for the left hand side. Adhere the vases directly to the paper since they are punched out and look 3D without dimensionals. I adhered the two larger vases close enough together so that I could adhere the middle little vase slightly on top of the larger ones and all three would fit on the 2″ shelf that was cut from Early Espresso card stock to a final size of 2″ X 1/4″ with the “Be Mine” stitched framelits. Hint: Start with a larger piece of Early Espresso and cut the scallop edge with the framelit and then place it in the Stampin’ Trimmer to cut to the 1/4″ shelf size. I cut a piece longer than the desired 2″ so I could cut exactly 1/2 of a scallop at each edge of the shelf.
She told me she was a “recovering perfectionist”! Maybe she needs more therapy. SHHHH……
Did you say something, Sal?
The shelf is adhered with the top of the shelf 1 1/4″ from the bottom of the Very Vanilla layer and 3/8″ over from the left and right sides. Stamp the greeting in Blueberry Bushel under the shelf.
It can be tricky to stamp the greenery at the right spot for the vases so stamp your vases and punch them out then trim off the bottom white edge of the vases. Punches generally leave a little edge all the way around the image just like what we teach in fussing cutting. You want the vases to sit directly on the shelf so trim off that bottom edge.
Temporarily place your vases where you want them on the shelf and use a pencil to lightly outline the top of each vase. Now make three more light pencil marks where you want your stem to attach to the tulip. The tulip is 3/8″. Vary the heights of the three tulips. Use a sticky note to mask the shelf and where the vases will be and stamp the stem and greenery in Old Olive. Then stamp the tulips in Cajun Craze and stamp-to-color in Daffodil Delight. I had a shadow on one of my leaves so I just hand drew another leaf to utilize the shadow.
Sheri always called that “Design Opportunity”!
That she did! And that it is! We sometimes use tiny butterflies or hearts to cover our shadows and it adds beauty to the card. I just ordered erasers from Amazon that are supposed to remove ink without damaging the paper. I will let you know if they work.
A Stitched Labels Die is used for the little greeting that says “so he made you” and the fancy die in that same set is used for the DSP cutout on the left side. The Pretty Label punch is used for the vase and flowers on the left side. This is one of those times when you want to punch first and then stamp so you can align the flowers and vase on the punched piece. Use the same procedure of placing the vase temporarily on the piece, lightly draw the top of the vase, mask with a sticky note and stamp the flowers with Memento Black ink, then adhere the vase, color the flowers in Daffodil Delight and the greenery in Garden Green. Adhere rhinestones colored with Cajun Craze Stampin’ Blends. Sponge the edge of the Pretty Label punched piece and the little rectangle greeting with Blueberry Bushel and pop up both pieces with dimensionals.
Summary:
Stamp sets: Vibrant Vases, Flourishing Phrases
Inks: Blueberry Bushel, Soft Suede, Old Olive, Cajun Craze, Daffodil Delight, Tuxedo Memento Black
Markers: Blueberry Bushel, Garden Green, Daffodil Delight
Stampin’ Blends: Cajun Craze to color rhinestones
Framelits/Dies: Be Mine, Stitched Labels
Punches: Vases Builder, Pretty Label
Embellishments: Four rhinestones colored with Cajun Craze
Card Base: Thick Very Vanilla 9 7/8″ X 5 1/2″ Scored at 4 1/8″ and 8 5/16″ ; Fold in the little right side first and then fold in the left side over the middle.
First Layer on left side and middle: Blueberry Bushel (make 2) 3 7/8″ X 5 1/4″ , Cut out the middle of the inside one. I used a retired rectangular framelit that I use to save paper when I am layering. A stitched rectangle framelit would work as well.
Second Layer on left side and middle: Pressed Petals DSP (make 2) 3 5/8″ X 5″ ; Cut out the center of the inside DSP layer with the Stitched Shapes Die- the fancy one. Use the cut out for the left side behind the Pretty Label punched piece.
Third Layer on left side and the flap for the front: Blueberry Bushel (make 2) 3 1/8″ X 4″. The left side 3rd layer is adhered 1/2″ down from the edge of the DSP and 1/4″ over from the edge of the DSP.
Fourth Layer on left side and the front flap: Very Vanilla (make 2) 2 7/8″ X 3 3/4″
Little Right side first layer: Blueberry Bushel, 1 1/4″ X 5 1/4″.
Little Right side second layer: DSP in plain burlap 1″ X 5″
The Blueberry Bushel Front Flap is adhered 1/2″ down from the burlap DSP on the little right side to exactly match the left side. This is done last! I put two pieces of tear and tape at the far right of the flap and then matched up the flap to the card’s left side and pressed it in place.
Shelf: Early Espresso, 4″ X 4″ Cut to 2″ X 1/4″ with the Be Mine Scalloped framelit and the Stampin’ Trimmer
Vases: Very Vanilla, Use the leftover from cutting the base or a 6″ X 3″
Punched Label: Very Vanilla 2″ X 2 3/4″
Left side greeting and the left side vase: 1 1/2″ X 3 3/4″ , you need it large enough to be able to hold it as you punch the vase. Stamp the greeting on the same piece and cut with the Little Stitched Labels Framelit.
I remember you looking at that little Die and saying it was too little to use for anything.
I did say that! Amazing isn’t it?! I am glad I have that set. I used two of the Dies on this card. I love the one I call the “fancy” Stitched Label Die!
Okay Sal, I am through with this post and it is your turn to guide folks to the store where they can shop to their hearts content! Don’t forget to check the Clearance Rack, friends, before you place your order, there are many Christmas sets available at great prices. I have a post coming up from our first Christmas card Stamp-A-Stack called Clearance Rack meets Stamp-A-Stack. Stay tuned!
SAL, Stamp A Lot, Smile A Little, Share A Love
Karen
Tea Together Bendi Card
Hello Stamping Friends,
May is zooming along and April projects are yet to be posted. To those of you waiting anxiously for some directions, thank you for your patience, and to those still looking for Mother’s Day inspiration I have a card or two that just might work.
I have seen several ‘Bendi Cards’ on Pinterest and when I saw Sara Levin’s Tea Together Bendi card I wanted to try it. She has a video at theartfulinker.com.
For those whose beloved mothers have passed away, the ‘Tea Together’ stamp set has an additional stamp that says “Love is a warm cup of tea”. A perfect saying for all those dear friends with whom we share a cup of tea and a listening ear!
Stamp Set: Tea Together, Amazing Life (for the corners on the back)
Designer Series Paper (DSP): Petal Promenade, Floral Romance, and Gold Foil Sheet
Dies: Tea Time Framelits (Pot and Cup), In The Woods (curves on the bendi arms), Be Mine Stitched Framelits (hearts), Sunshine Wishes ( Love), Celebrate You ( You). The club ladies also used the Happy Birthday framelit for an alternative saying.
Ink: Versa Mark, Old Olive
Tools: Gold Embossing Powder, Spritzer with Frost White Paint (Wink of Stella does the same), Tufted Embossing Folder,
Embellishments: 6″ of gold and white 1/8″ Tea Room ribbon
Card Base: Blushing Bride, 5 1/2″ X 4 1/4″
Layer 1: Old Olive, 5 1/4″ X 4 1/8″ – note: this layer has a 1/8″ border on the top and sides but is flush to the bottom. Lay this piece landscape on the Stampin Trimmer at 1 1/2″ from the left and cut from 2″ to 3 5/8″ to make a tab for the bendi arm, then run through the Big Shot with the Tufted embossing folder. (Alternatively, you could make your large bendi arm with its tab and lay the tab 1 1/2″ from the left edge and place pencil marks on the old olive layer at the widest parts of the tab and then cut.)
Bendi Arms:
Old Olive, 5 1/2″ X 4 1/4″ , Score at 1/2″ in landscape then turn to portrait and cut at 2 1/2″. You now have an arm that is 2 1/2″ X 5 1/2″ and an arm that is 1 3/4″ X 5 1/2″. The large arm is at the right side of the front and the small arm is at the left.
Place tear and tape on the 1/2″ scored section on the side that will wrap around the tufted old olive layer. This will help you keep from mixing up the arms. Oops, I mixed them up in the picture! The small arm goes to the left!
Score 3/8″ on the unscored side of the arms. Make a tab out of the 3/8″ scored edge by marking lightly with a pencil 1/2″ from the top and 1/2″ from the bottom of each arm. Fussy cut a tab on each arm by cutting a slight diagonal from the pencil mark to the edge of the arm. The larger arm will have a 1 1/2″ tab and the smaller arm will have a 3/4″ tab.
DSP for Bendi Arms: Petal Promenade 4 1/2 + 1/16″ (4 9/16″) X 1 3/4″ Small Arm, 4 1/2 + 1/16″ (4 9/16″) X 2 1/2″ for Large Arm. I know, I know, crazy measurements but we don’t want a green border where the small arm goes in to the large arm.
Cut both the DSP and the Bendi Arms at the same time to have a matching curve – the framelit will handle two layers. I used the curved die from the ‘In The Woods’ framelit set. Or fussy cut, making sure the curve on the small, left hand arm goes up at the right side where you will attach the teapot. If it is cut too narrow at the right side you won’t have room for the teapot above the cup. (yep-made that mistake!) Slide the DSP flush to the bottom of each arm giving you a border at the top and adhere. This picture shows the backside of the teapot and how important it is to curve up the bendi arm to give room to attach the teapot.
You have already made the slit for the large arm to slide into the Old Olive layer, now you need to make a slit in the large arm for the small arm to slide into. Lay the large arm on your stampin’ Trimmer at 2 1/2″ from the right edge (this includes the 1/2″ scored for the fold). Cut a slit from 1 1/4″ to 2″.
Work your two bendi arms into a curve with your fingers to break down the paper fibers so the arms curve easily.
Adhere the arms to the Old Olive layer. (Earlier you put tear and tape on the side that wraps around).
Now adhere the entire front to the Blushing Bride back. I used Tear and Tape for strength. Remember you do not have a bottom border, it is flush.
Teapot and Cup: Floral Romance DSP, 3 1/2″ X 12″ ; Stamp two pots and two cups with Old Olive ink. Cut with the framelits and then stamp with Versa Mark and gold emboss a large flower on the teapot and the small buds on the cups. I gold embossed both cups and both teapots so I could choose the best for the top. Spritz the cups and teapots or paint with Wink of Stella.
Teapot: Top layer has handle, base, lid cut off. Pop up on whole teapot with dimensionals.
Teacup: Top layer has handle, base, back of cup cut off. Pop up on the whole cup with dimensionals.
Both the teacup and the teapot are mounted on the small arm. Start by adhering the teacup 3/4″ from the left on the small bendi arm with glue dots. Now lay your bendi arms flat and mount the teapot on the top right edge of the arm tilting it to make sure no part goes outside the Blushing Bride layer so that it fits inside the envelope. Use a glue dot to put the hearts between the two layers of the tea cup and pull the tea cup handle in front of the teapot. The hearts are behind the teapot. Both the hearts and the teapot “float” with very little adhesive. Note the Dimensionals on the very bottom of the back of the teapot.
Embellish: Gold Foil, 2 1/2″ X 4″ Cut – love (Sunshine Wishes Framelit), – you (Celebrate You Framelit), and 9 hearts (on right hand side of Be Mine Stitched framelit). One of the punched out hearts was put between the words with a little bow underneath. The 9 open hearts are placed between the two layers of the cup to look like steam.
Embellish the back of the Blushing Bride with an Old Olive strip 7/8″ X 5 1/2″ and a Petal Promenade DSP strip 3/4″ X 5 1/2″. Use the corner stamps from the Amazing Life stamp set to make a nice corner with gold foil accent.
This special fold card is worth all the work when your mother or friend is astonished by your creation!!
I would love to hear from you! Leave a comment below. I will be back with another card tomorrow.
SAL, Share A Love
Karen
Awesomely Artistic Eclipse Card
Hello Stamping Friends,
I chose two of my favorite sets to make an Eclipse card – the stamp set “Awesomely Artistic”, and the color Island Indigo. In my usual monochromatic style I did cards for Mother’s Day, thank you cards and friend cards. Her are various fronts and insides of the cards -the inside could just as easily be the outside of a card.
The Glitter Enamel Dots, matched the Island Indigo perfectly and added sparkle. The dragonfly is colored with the Wink of Stella Glitter Brush, and the flower centers are a drop of glue from our Fine-Tip Glue Pen, with Dazzling Diamonds Stampin’ Glitter sprinkled on top. The For You greeting comes from the retiring stamp set “So Many Shells”.
Instead of Glitter Dots you could be a bit eclectic and use the stamp from the “Awesomely Artistic” set that has dots. The greeting, “From Across The Miles”, is a stamp in “Holly Berry Happiness”. I used a sticky note to cover up the Christmas Wishes words on the stamp, inked the stamp, removed the sticky note and stamped. Voila- a greeting to use any time of the year.
Or just stamp the flowers a little on the edge of your front layer:
The insides of the cards were fun to customize. My daughter is expecting her first child so this is her first Mother’s Day. A greeting in the “Special Celebrations” stamp set was perfect:
The Daisy Delight stamp set had the ideal message for the many thank you notes I needed after my father’s passing.
For dear family and friends, the Occasions Catalog “Petal Palette”, has the perfect message:
And of course Mother’s Day is coming up so I went back to the Special Celebrations stamp set for a special message:
Card Base: Whisper White 8 1/2″ X 5 1/2″ Scored at 4 1/4″
Island Indigo Layer: 5 1/4″ X 4″, Make two
Whisper White top layer: 5 X 3 3/4″, Make two
Stamping Order for the top is a bit critical so you don’t have the images running into each other:
- Stamp the greeting at the bottom
- Stamp the dragonfly
- Stamp the flowers
Color the dragonfly with Wink of Stella, then line up the Large Letters Framelits, #141712, spelling HUGS on your stamped top layer and run through the Big Shot. Adhere all your layers and then put Foam Adhesive Strips, #141825, on the back of the cut out letters and glue the letters back in their respective spaces. Helpful Hint: I adhered the letter framelits to a large sticky note and then placed the sticky noted letters on the top layer so I could use it over and over without realigning the framelits each time.
I checked Eclipse cards on Pinterest and found so many words that were used: HOPE, LOVE, YOU, WISH, BDAY, MOM, BABY, BOY, DAD, GIRL, GIVE, NOEL, (NAME), (DATE), JUST, FAITH, JOY, 4EVER, EPIC, BEST (friend). Graduation cards with dates are popular now using the retiring Large Number Framelit set, #140622. The Large Letters framelits will carryover to the new catalog but not the numbers set.
Have fun making your own Eclipse cards!
SAL, (Stamp A Lot, Smile A Little, Share A Love- and always be Salt And Light in your world)
Karen
Magic Shutter Easter Card & Mother’s Day Card
Hello Stamping Friends,
My Easter card this year was the Magic Shutter Card. There are many videos on pinterest by that name, though I found if I prop my smart phone up on a stand, I can scroll through the dimensions on a written post like this one as I construct the card. Then there is no stopping and starting a video and trying to take notes, just tap the screen and scroll to the next step. Do you like doing that?
The Delightful Daisy Designer Series Paper (#144137) matched with Wisteria Wonder card stock (#122922) does all the work of making the card beautiful. As you open the card the shutters open like the shutters on a camera for a great “ooooo….” moment. One designer put a picture of her child behind the shutters. With Teeny Tiny Wishes (#127802) this card could say Happy Mother’s Day or Happy Graduation or any of the other tiny wishes.
- The base is Thick Whisper White cardstock cut at 8 1/2″ X 5 1/2″ and scored at 2 1/8″ and 6 3/8″ Tip: After scoring the card base, gently fold the scores bringing the two sides to the middle to exactly match and then hold them in place and use your bone folder to firmly burnish the score lines.
Next let’s make the skinny panels on the fronts and the inside right and left. They are all four the same size. (Note: DSP means Designer Series Paper.)
- Wisteria Wonder = 1 7/8″ X 5 1/4″ make 4
- Delightful Daisy DSP = 1 5/8″ X 5″ make 4
Attach the DSP to the Wisteria Wonder layer and then attach each to the base.
Now let’s make the inside middle panel but it won’t be attached until after the shutters are attached.
- Wisteria Wonder = 3″ X 5 1/4″
- Delightful Daisy DSP = 2 3/4″ X 5″
Attach the DSP to the Wisteria Wonder. The circle in the middle is cut out with a 2 1/2″ layering circle framelit (# 141705) or the retired 2 1/2″ punch. Cut your circle out just slightly above middle. Tip: If you are using a punch, punch out a template on a sticky note and put it on your card panel to guide where you punch. Come down from the Wisteria Wonder top 1 1/4″ which will give you 1 1/2″ at the bottom of the circle cut out.
- Stamp the greeting on a Whisper White Strip 3 1/2″ X 1″ and punch it out with the Bow Builder punch (#137414). Attach it to the center of the circle cut out. The cut out will show behind the shutters so choose what you want to show, or match, as you glue on the greeting. Draw around the greeting with a Wisteria Wonder marker or sponge the greeting edges before gluing to the circle cut out.
You are not going to attach the middle panel yet, but you need to use it to guide where you glue the circle cut out. Hold the panel in place with a sticky note, put glue on the back of your circle cut out with the greeting, and carefully press your circle directly through the opening. Put the panel aside as you make the shutters.
Shutters:
- Wisteria Wonder = 4″ X 3 1/2″ Make two. Mark the center of one piece by coming down 1 3/4″ on the short side and over 2″ on the long side. Use a ruler and draw a line from the middle mark to the top and bottom corners on the short side. Cut out this triangle which you can then use for cutting the other shutter piece. (Save your template for future cards.)
Clip the pointy ends off the shutters. Score the uncut side at 1/2″.
Fold your score line and burnish well then unfold it and place the shutter right along the edge of the fold on the base. Put a piece of sticky tape on the 1/2″ edge.
Remove the sticky tape cover and then fold the side over pressing it onto the sticky tape.
Repeat on the other side. Layer the shutter’s points with one point on top of the other shutter and one point below.
Most of the cards online use a belly band but I prefer a ribbon that stays attached. I used the retired ribbon punch and punched the edge of the fold on each side. The Pretty Label punch (#143715) would work almost as well. Close each side and punch a little slot in the Whisper White base. I marked 1/2″ up from the bottom with a pencil so both sides would be in line.
Run the ribbon (20″) through the slots. Now you are ready to mount the middle panel. Place an Adhesive Foam Strip (#141825) at the very top of the panel and the very bottom of the panel and then mount the panel over your shutters and ribbon. (You could use the Stampin’ Dimensionals as well but it would take quite a few.)
After the inside was done, I put pearls on each end and tested to see if they would interfere with the shutters. They didn’t –so it worked!
The Card Front
The “Celebrate” thinlit was a Sale A Bration free product that will be available in the new catalog June 1st!
- Three “celebrates” were cut out – two with Wisteria Wonder 3″ X 4 1/4″ and one with Thick Whisper White 1 1/2″ X 4 1/4″. The purples were glued on top of each other and the white was offset a little. I used Tombow liquid glue and drew a thin line of glue on the letters – counted to twenty to let it get tacky- and then glued it on. If you wait just those twenty seconds the glue won’t gush out on your project.
The butterfly is stamped with the “You Move Me” stamps (#144002) and cut out with the “Move Me Thinlits” (#143732).
- Whisper White 1 1/2″ X 3 1/2″ will do both the butterfly and the He Has Risen greeting. Stamp the butterfly first with the solid stamp in Crushed Curry and then stamp the wing detail in Tangerine Tango. (I love two step stamping sets, and the butterfly thinlits even have antennae!) I used a Tangerine Tango marker to draw a thin line on the antennae then attached the little beauty with a glue dot under one wing.
- The greeting is from the retired “Easter Message” stamp set and cut with a Stitched Shape Framelit (#145372).
My Mother’s Day card uses the current Lovely Words Thinlits (#143733) and the Whisper White 1/4″ Organza Ribbon from the Occasions Catalog Page 23 (#145590). The “For You” greeting is from the So Many Shells stamp set (#143695).
The little heart is from the Subtles Enamel Shapes (#141679).
After I had taken pictures I added another heart on the greeting and one down in the bottom left.
What do you think? The Delightful Daisy Designer Series Paper (#144137) will be retired after May 31 and the retired list comes out on April 9 so it will only be available while supplies last. Click on the little SAL computer image to order this or any other products!
SAL, Share A Love
Karen
Blossoming Basket Bundle
Hello Stamping Friends,
Are you thrilled with this year’s Occasion Catalog and the free Sale A Bration items? I sure am. And to bless us even more, Stampin’ Up! announced a few extra Sale A Bration items available February 16. As a demonstrator, I am able to preorder the items and I received them just in time for Deana’s annual Sale A Bration party. Here is the brochure of the new products:
My favorite new product is the free Blossoming Basket Bundle. The bundle includes the stamp set and the Basket Weave Dynamic Textured Impressions Embossing Folder. (Note: These new Dynamic embossing folders have a deeper image and are a thicker folder so you do not use the bottom cutting plate and you spritz the paper before putting it in the folder and running it through the Big Shot. This keeps the paper from tearing.)
There are no framelits with the set so I made cutting templates for the stampers by stamping the image on white cardstock and then placing the stamp back on the image without the block and drawing around the stamp with a pencil. I cut the image on the pencil lines to create the template. I did the same with the greeting. I liked all the little curves that the stamp had from the factory cut. I am sure Stampin’ Up! cuts various shapes to make identifying and mounting the stamps easier and the curves on this set sure made for a nice outline. With wooden sets you would just need to make your template from the stamp before mounting it to the wood. Store the templates with your stamp set and you are ready for the next card.
Base: Calypso Coral 8 1/2″ X 5 1/2″ Scored at 4 1/4″
Layer 1: Soft Suede 4″ X 5 1/4″ ; spritz with water, run through Big Shot with the Basket Weave Dynamic Textured Impressions Embossing Folder; sponge top with crumb cake here and there for a little extra depth
Layer 2: Doily – this one is the older Stampin’ Up! version which is 4″; the new ones, item #141701, are 3 1/2″ which would be better for showcasing the basket by not having as much doily showing. Warning: Do not put glue on the top part of the doily, use glue dots around the edge. The bottom of the doily which will be covered by the basket can be glued down.
Basket, tag and butterfly: Shimmery White 3 1/2″ X 3 1/2″ The basket, tag and butterfly stamps can all be placed together on a size E block to stamp the images at the same time.
Ink: If you are using the new Stampin’ Blends alcohol markers, use the Memento black ink; with the regular markers, which are water based, use the black Archival stampin’ ink.
I used Stampin’ Blends to color:
- Flowers, tag, butterfly – Calypso Coral, light and dark markers;
- Basket – Crumb Cake, light and dark;
- Leaves – Old Olive, light and dark:
- Flower centers – Dark Daffodil Delight;
- To enhance the colors – Color Lifter.
My favorite technique is to outline the outside with the dark marker and then use the light marker to blend the dark line and color the rest. The leaves are too small for that technique, so I colored one type of leaf in light green and one type of leaf in dark green and then used the color lifter to create lighter tones.
Click here for a Stampin’ Up! video on blending with the new alcohol markers.
Embellishments: 12″ of Linen Thread #104199, cut in half and made into a double bow; Metallic Enamel Shapes #141678
Our Clear Wink of Stella Glitter Brush was a hit with the stampers as they used it to add sparkle to the butterfly, hearts and middles of the flowers. It is item #141987 and shown on page 200 of the Annual Catalog.
The inside uses a greeting from the Special Celebrations stamp set in the Annual Catalog page 23. This set is great with greetings for birthdays, babies, weddings, and friendships.
The bottom basket weave piece starts at 5 1/4″ X 1″; it shrinks up a little when it is embossed so the Whisper White layer is cut at 5 1/8″ X 4″.
To better utilize our time at the party, I had kits made with card bases of Cherry Cobbler, Bermuda Bay and Pumpkin Pie along with the Calypso Coral cardstock shown here. That way, each stamper could play with a set of matching Stampin’ Blends and not be rushed to do their coloring. I wish I had taken a picture of all the beautiful cards they made in the different colors.
There is still time for you to book a Sale A Bration party. If you don’t live in the area, I can set you up with a hostess code and you can have a catalog party with your friends. If you live here in Castle Rock, why not host your own party and earn even greater hostess rewards. Along with each guest earning a free product with a $50 purchase, you can earn free product for your purchases and hostess dollars for the total of all the orders. During Sale A Bration you earn an extra $25 in hostess dollars with a qualifying party. Call or text me now! 303-815-0838.
Our current hostess code for orders under $150 is VJHRB73X. Orders over $150 – you earn dollars yourself!
SAL, (Stamp A Lot, Smile A Little, Share A Love)
Karen